The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Wanted: Home Cinema receiver 5.1


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Line Audio over Cat5


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: Line Audio over Cat5
  • From: Mark Harrison <Mark.Harrison@xxxxxxx>
  • Date: Thu, 26 Jul 2001 10:24:53 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Dan,

I'd be surprised if even screened cable would be good enough for a run at
line-level of more than a couple of meters. If you think about pro audio,
then things tend t  be balanced, or speaker-level!

Don't consider running non-balanced audio signals over CAT5.

While there are other systems t  d  this apart from Keith's, I've not met
any of them that come close in price/performance. The only two I'd touch
are
KAT5, and Linn Knekt. Linn Knekt is better, in terms of integration and
functionality, but at 10 times the price of KAT5. I would say that the
sound
quality of the two systems is comparable, but I've never done a blind A/B,
only heard them separately.

If you want t  borrow my pair of KAT5 units t  try, you're welcome!

Mark Harrison
Head of Systems, eKingfisher
-----Original Message-----
From: Dan James [mailto:UKHA@xxxxxxx]
Sent: 26 July 2001 10:15
To: ukha_d@xxxxxxx
Subject: [ukha_d] Line Audio over Cat5


before someone shouts KAT5.... :-)

I am planning the Final Cabling of my house, and as part of this I
want t  run a Line Out Audio Feed from Node Zero t  the Stereo in the
bedroom...

Can I do this over Cat 5 or should I just use Screened Audio cable?

Also I am about t  have a new Aerial installed as the one on the roof
is useless, I am going t  put the cabling in and then find someone t
go up the ladder on the outside and d  the honours on the roof, is
CT100 ok for this (will be moving the sky dish up there t o, away
from the front of the house) So will have t  d  a dual run upt  it
and it makes sence to use the same cable.

Thanks

Daniel




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/



_____________________________________________________________________
This message has been checked for all known viruses by the
MessageLabs Virus Scanning Service. For further information visit
http://www.messagelabs.com/stats.asp


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.