[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: LD10 Wiring Questions
- To: ukha_d@xxxxxxx
- Subject: Re: LD10 Wiring Questions
- From: Martin Greenwood <martin@xxxxxxx>
- Date: Tue, 5 Jun 2001 10:51:48 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <9fg9vi+esio@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
Mark,
At 3:37 pm +0000 4/6/01, Mark Hetherington wrote:
>From the diagrams on the comfort site, it seems I basically just need
>to patch into the switched live at the ceiling rose (plus find the
>source of the Neutral and Live connection for the other connectors).
>In order to allow both home run to Node 0 and an easier removal
>if/when I move house I am considering installing a junction box
>at/near the rose to split the original switched live allowing me to
>run cable to Node 0 for the DIN module and a simple rejoin of cables
>should I remove it from the circuit.
I will probably leave the dimmers along with a spare if I moved. They
should be just as reliable as any other dimmer system.
This is also because I will have momentary clipsal switches in normal
positions, so it will all work without a controller.
Or you can could simply link them out in Node 0, leaving the extra
wires in place.
>This is probably a dumb question but it has me stumped at the moment.
>The thing I don't quite follow is the source of the live/neutral
>connection to the base of the LD10. Is this coming from the ring main
>or somwhere on the lighting circuit?
It should come from the lighting circuit as this is the power for the
lamp/s.
I think you would want the lights to work even when the ring main
sockets have tripped or been switched off!!
Regards,
Martin
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|