The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Classic looking radio with ability to connect to Spotify or Amaz


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: where do i get 19" racking enclosures in the UK? + fire regs


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: where do i get 19" racking enclosures in the UK? + fire regs
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Wed, 6 Jun 2001 18:31:22 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Fire stop the conduit with a wad of Glass Wool at each end.

Keith

> -----Original Message-----
> From: matthew@xxxxxxx [mailto:matthew@xxxxxxx]
> Sent: 06 June 2001 18:26
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] where do i get 19" racking enclosures in the
UK? +
> fire regs
>
>
> Maplin are worse than useless. RS look a possibility, just wondering
> if anyone has any other suggestions of where to source 19"
racking
> cabinets/enclosures in the UK? I've settled on my node zero being the
> garage so i'd like to enclose my hub and bits in a spider/dust proof
> enclosure in the corner.
>
> Secondly, as im now going to have a hoooge amount of cables coming
> into the garage from the room above i was going to install a bit of
> square plastic drain pipe to act as conduit. Is anyone aware of any
> fire regs or anything I should be doing if i poke a 10cm square
> plastic pipe up from the garage through the plasterboard into the
> room above????
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.