RE: Re: Anyone seen the X10 Mains Sockets on LetsAutomate?

[Keith Doxey <ukha@xxxxxxx>]

1. why not convert a US module and fit it inside the hoover/lamp/wherever
casing thereby avoiding a bulky plug.

2a. If the socket is turned off the module would not be connected!!!!
2b. If the socket is on the module would act as normal.

Keith

-----Original Message-----
From: Graham Howe [mailto:graham@xxxxxxx]
Sent: 08 June 2001 15:54
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: Anyone seen the X10 Mains Sockets on
LetsAutomate?


> -----Original Message-----
> From: Mark Hetherington
> [mailto:mark.egroups@xxxxxxx]
> Sent: 08 June 2001 15:20
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Anyone seen the X10 Mains Sockets on
> LetsAutomate?
>
>
> Maybe someone ought to develop an X10 trailing extension cable.
> Basically 4 LM/AM10s wired together to an extension cord givings us
> plenty of "mobile" fixed address sockets :)
>
> Mark.

Another good item would be an x10 plug, you could then connect that to the
appliance (for example hoover) and it wouldn't matter where you plugged it
in!

Just had a thought, what happens if an x10 appliance or lamp module (or
controller for that matter) is plugged into an x10 socket, is everything
still OK or will there be 'problems'

Graham




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/