[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Anyone seen the X10 Mains Sockets on LetsAutomate?
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Anyone seen the X10 Mains Sockets on
LetsAutomate?
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Fri, 8 Jun 2001 16:21:04 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> Maybe someone ought to develop an X10 trailing extension cable.
> Basically 4 LM/AM10s wired together to an extension cord givings us
> plenty of "mobile" fixed address sockets :)
I had a couple of 1m trailing leads with "PSU" boxes inserted in
the middle
of them with an LD10/11 installed inside so that I could easily X10ify
table
lamps and have the "go to level" feature that is missing from the
plug in
"wall wart" units.
There's no reason why you couldn't do that with AD10s I guess ... in fact
they'll produce less heat so should be easier!
Phil
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|