[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Whole House Audio
- To: <ukha_d@xxxxxxx>
- Subject: RE: Whole House Audio
- From: "Michael Mc Aree" <michael.mcaree@xxxxxxx>
- Date: Wed, 20 Jun 2001 16:03:35 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Didn't think it would be that simple :-(
Many thanks James :-)
> -----Original Message-----
> From: James Hoye [mailto:james.hoye@xxxxxxx]
> Sent: 20 June 2001 15:57
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Whole House Audio
>
>
> This email was delivered to you by The Free Internet,
> a Business Online Group company. http://www.thefreeinternet.net
> ---------------------------------------------------------------
> > I have a few speakers scattered around the house
> > which are connected back to the PC. I play MP3 on
> > the PC and want to have the music in some rooms but
> > not in others. Could I connect the speakers through
> > an X10 universal module (or the 4/8 X10 relays) and
> > the music would stop coming out of the speaker if I
> > switched the X10 Universal Module off? Is it as simple
> > as that? Using Homeseer I can start Winamp using an
> > X10 command and since I got a cheap RF device
> > (thanks Homebase) I thought I could use that to
> > start/stop Winamp and have control over which
> > speakers/rooms are active. Discuss...
>
> Careful with doing this as the amplifier will see a difference
impedance
> depending on how and how many speakers are connected at any one
> time. This
> will affect the volume as well. Below 4 ohms a lot of amps get
> very hot and
> don't like it. Some of the high end ones will drive into 2 ohms
happily I
> believe.
>
> For example, connecting a pair of 4 ohmn (nominal) speakers in
> parallel will
> present a 2 ohm impendance - not good.
>
> James H
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
###############################################
This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
company, unless specifically stated.
#################################################
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|