RE: X10 signal problem

["Paul Miller" <pmiller@xxxxxxx>]

Thanks Phil,

I had just sussed that out, when you're mail came in.
so its now all working.

Thanks

Paul


-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 05 March 2001 12:51
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] X10 signal problem


Yup ... I have had very similar problems.

Firstly ... try plugging your X10 "source" (ie the TW7223 that HV
uses) into
a different socket. Just by moving mine one socket further along the ring
main (one socket away from the PC power supplies) my house has gone from
being half-blind to X10 to being fully X10 aware.

Phil

> -----Original Message-----
> From: Paul Miller [mailto:paul@xxxxxxx]On Behalf Of Paul
Miller
> (E-mail)
> Sent: 05 March 2001 12:35
> To: Ukha_D (E-mail)
> Subject: [ukha_d] X10 signal problem
>
>
> Hi Guys,
>
> I noticed a few weeks ago (first chance to look at it) that
> the maxi keypad
> in my upstairs bedroom was not communicating with homevision
> downstairs. I
> have just gone round the house with a mini controller and
> determined that
> the homevision on the downstairs ring main cannot see anything on the
> upstairs ring main, nor can it see the upstairs lighting
> ring, but it can
> see the downstairs ring main and the downstairs lighting
> ring. This is very
> strange as it has been in and working with no problems for
> around 18 months.
>
> Has anyone any ideas?
>
> Paul
>
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/