[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: CID & Linux (was OT: DECT phones - advice)
- To: ukha_d@xxxxxxx
- Subject: Re: CID & Linux (was OT: DECT phones -
advice)
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Fri, 11 May 2001 11:26:54 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>I used to have a Hayes Accura to do Caller ID with, but it would never
work
>reliably, though I suspect this was down to the modem itself rather
than
>Linux, as others had similar problems with Windows too.
Seconded. - I currently use a Hayes accura with Homeseer phone, and the
caller ID detection is very unreliable. - it will very frequently just
"stop" reporting it, - just like as if an "AT#CID=0"
command had been
sent...
I Turn it back on by either restartinh HSP, or manually sending an
"AT#CID=1" to it, whereupon it will be OK again for a while,
(a"while" being
anything between 30 minutes & 2 days), before it just "stops"
again...
BAG OF SHITE!
Paul G.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|