[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: X10 Fan speed control
- To: ukha_d@xxxxxxx
- Subject: RE: X10 Fan speed control
- From: "K. C. Li" <li@xxxxxxx>
- Date: Sat, 12 May 2001 10:15:43 +0100 (BST)
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> OK ... Sounds like a good enough reason to haul out the toys from
under
> Edwards bed and try to "borrow" the lamp module that his
bedside light is
> using at the moment.
I would advise against doing it. Motor loads usually do not like the
altered sine wave that dimmer modules put out, even at 100% brightness.
The motor under control is liable to heat up and, in some case, burn out.
Regards,
Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|