[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: [Project] Power requirements
- To: <ukha_d@xxxxxxx>
- Subject: Re: [Project] Power requirements
- From: "Mark McCall" <mark@xxxxxxx>
- Date: Tue, 29 May 2001 09:01:46 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <9evfcr+hdig@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
> Just thinking, how should we be providing power to our devices, the
> lcd/keypad device will be installed in a two gang box, do most people
> have two cat5 cables in ? We could use the single cat5 but i am
> concerned about it becoming a non standard interface.
Peronally I ran 2 CAT5s to every light switch in the house so that sounds
OK.
> Assuming we provide the power either on the primary ethernet cable or
> a second cable, what voltage should we use, it should be comman for
> all devices, so that one PSU can run all devices.
I read in last months Home Automator about a new version of ethernet that
provided power over the CAT5. Anyone else heard of this? Will it become a
standard?
M.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|