|
At
present I found the easiest way forward was to use
HomeVision
It
means buying the expansion unit but that then gives you more temps sensors
than
you need
and
they are easy to set up and intergrated into HV
that
gives you then all the sensing you need and logic
the
control is then your choice
Homevision ends up controling whatever you decide via
relays
I've
got mine working a combi boiler and just put a few relays in series with
the
control circuits.
at the
moment I'm palying with humidity sensors for my garage but thats a
different
story!!!
Hope
this helps
Mike
At Home
Hi,
New
to the group and looking for someone who has managed to come up with a
simple
method for hooking up a multizone heating system to a HA controller. (in my
case it's a Unipipe Underfloor Heating System) using one of the
following:
Communicating Thermostats
Remote Temperature Sensors either digital or
analog
or possibly, Bog Standard Stats wired in series to X -10
switches.
I've
found suppliers for the communicating stats (expensive) and the remote
sensors
( cheap) but it's a question of hooking it all up with simplicity and
redundency.
Any
ideas. I can't be the first...
Chris
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|