RE: AM12U Appliance Module

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Err, great Keith, just taken the top off and apart from a large headed
screw
floating around inside I aint got a clue what to remove?

The parts are labelled on the circuit but not on the diagram, or am I being
stupid?

Can you possibly point me in the right direction please.

Thanks,

B.

> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 06 October 2001 16:25
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] AM12U Appliance Module
>
>
> There is a 2K2 resistor for current sense which forms part of the
local
> control circuitry (top right on diagram). If there is a very low
> load on the
> module there may well be enough current to keep it partially powered.
>
> Keith
>
> > -----Original Message-----
> > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > Sent: 06 October 2001 16:20
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] AM12U Appliance Module
> >
> >
> > There shouldn't be current "seepage" with an appliance
module as
> > there is a
> > rudy great relay in there doing the switching and there shouldn't
be
> > anything seeping through that.
> >
> > Do you actually hear the appliance module clunk off? Can you
measure the
> > voltage at the input to the switcher?
> >
> > Phil
> >
> > > -----Original Message-----
> > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > Sent: 06 October 2001 15:41
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] AM12U Appliance Module
> > >
> > >
> > > No the transformer does not cause it to switch back on the
> only reason I
> > > know it is still on is the "On" LED goes dim but
not off
> which is why I
> > > thought current seeping through.
> > >
> > > B.
> > >
> > > > -----Original Message-----
> > > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > > Sent: 06 October 2001 14:59
> > > > To: ukha_d@xxxxxxx
> > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > >
> > > >
> > > > Does the transformer turn off and then turn back on
again
> after a few
> > > > seconds when you send the X10 off command?
> > > >
> > > > Phil
> > > >
> > > > > -----Original Message-----
> > > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > > Sent: 06 October 2001 14:24
> > > > > To: UKHA Group
> > > > > Subject: [ukha_d] AM12U Appliance Module
> > > > >
> > > > >
> > > > > Guys I am sure this has been mentioned before so
sorry if it has
> > > > > but I have
> > > > > at last finished my rack-mounted CCTV switcher but
I have a
> > > > > slight problem.
> > > > >
> > > > > I have plugged the switcher transformer which
supplies the
> > > power to the
> > > > > switcher and the CCTV cameras into an Appliance
Module AM12U
> > > but when I
> > > > > switch the AM12U off the "on" LED on my
switcher stays on, I
> > > > have heard of
> > > > > this before as their is a current draw(?) I think
I have to cut
> > > > something?
> > > > >
> > > > > Can someone please advise me as to what to do
please.
> > > > >
> > > > > Also thanks Keith for the wiring advise re LED's,
fuses and
> > > > resistors lots
> > > > > back.
> > > > >
> > > > > TIA.
> > > > >
> > > > > B.
> > > > >
> > > > >
> > > > >
> > > > > For more information: http://www.automatedhome.co.uk
> > > > > Post message: ukha_d@xxxxxxx
> > > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > > List owner:  ukha_d-owner@xxxxxxx
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > List owner:  ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx
> > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > List owner:  ukha_d-owner@xxxxxxx
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/