The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: RF 433MHz temperature/weather sensor receiver for the PC.


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New PC Build (slightly OT)


  • To: ukha_d@xxxxxxx
  • Subject: Re: New PC Build (slightly OT)
  • From: "Paul Gordon" <paul_gordon@xxxxxxx>
  • Date: Tue, 09 Oct 2001 22:00:03 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


>
>But before I jump any comments
>I’m looking at scan (Haven’t spoken to anyone yet)

Several comments:

definately checkout www.ebuyer.com as well as Scan...
- almost always lower prices, and better delivery charges (like free if
your
order is over £100!)


>Abit KT7-A-RAID Socket A KT-133A without Audio
>1.4GHz (266fsb) AMD Athlon SoA CPU
>512Mb SDRAM PC-133 (64x4)
>41.2Gb IBM Deskstar 60GXP ATA-100 (8.5ms 2MB Cache 7200rpm)
>+ assorted goodies
>Must have 1 ISA slots for my serial extender card
>
>Any comments on cases and PSU

Check that the PSU which is fitted with the case is suitable for an AMD
Athlon. - not all are,  - I recently had to upgrade two PSU's (at £20 each)
as a result of upgrading to an Athlon, which actually caused 2 ATX PSU's
(as
fitted in Scan cases) to die...


>The scan one for £35 seems cheap wats the catch ?
>They also have an aluminium one for £169 so I’m a bit confused
>

I believe the Ali cases don't include a PSU at all!


>or can someone recommend a good newsgroup for PC builds etc
>
>Thanks

Yeah, this one! (and look at Tom's Hardware guide)


>
>Mike
>
>Sent from Home
>


_________________________________________________________________

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.