[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Socket 7 motherboard
- To: <ukha_d@xxxxxxx>
- Subject: RE: Socket 7 motherboard
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Sun, 2 Sep 2001 11:34:54 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Try doing a yahoo or google search on the FCC ID of the board (if that's
all
the info you have) and that should reveal the manufacturer and model ...
then a quick visit to their website usually turns up a PDF of the manual.
Usually worked for me with the motherboards I swiped^H^H^H^H^H^Hwas given
from work!
Phil
> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 02 September 2001 11:21
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Socket 7 motherboard
>
>
> You are in luck (well, sort of)
>
> I have a Socket 7 board, with integrated IDE/bits. none of the cables
are
> here (but they are all standard fare for these boards) It has
> 16Mb worth of
> DIMMS, and a Cyrix 6x86 120Mhz Processor, which I will leave on
(mostly
> because I just booted it with that combo)
>
> The "sort of" component comes in the fact that I don't have
the manual for
> this beast, and therefore setting the jumpers might be
"educational"
>
> You can have it for the postage. :)
>
> Ian.
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Home |
Main Index |
Thread Index
|