|
A is just light circuits on grnd floor -
not
control. AV room curtains (for example) are wired to a Comfort output
so
they can be triggered from any keypad, phone or an X10 command (on the D
housecode).
Like Mark I use M house code for Macros so HV
can
map stuff. I'm also unlikely to add any more stuff as everything was
built
into the house from scratch. While you might need a new phone point
or
data point in the future it's rare people start adding lighting circuits in
a
room, especially as we also have 5amp socket wired to LD10s for lamp
control.
Next upgrade will be to UKHA Project control
boxes
anyway - what ever happened to that? :-)
M.
----- Original Message -----
Sent: Wednesday, September 05, 2001
10:03
AM
Subject: RE: [ukha_d] Views on X10
Addressing
Chuff me!
I
could only just manage like that at the moment and I don't consider that
I've
rolled out anything in the way of control yet ... I've reserved the "top
three" unit codes for each room initially for radiator valve, MS13e and
curtains but it now looks like if I do these items then they'll be hard
wired
control anyway.
Phil
Chris
If using Comfort and starting from the default
file then downstairs is A, upstairs is B and outside is L. This will
save a LOT of reprogramming Comfort responses. I have used all 16 A
codes though so things are a bit tight downstairs.
M.
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|