The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Ceiling speaker backboxes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: ATX/IR

  • To: <ukha_d@xxxxxxx>
  • Subject: RE: ATX/IR
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Thu, 20 Sep 2001 10:48:53 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx
 
Go down the X10 route. If your BIOS supports start on plugging power use an appliance module else one of the relay closure modules bridged accross the switch wires. You would have to know that the release command had been received though otherwise your button will remain pressed in.
 
<<A universal X10 module can be set to do "momentary" (actually about 2 seconds) action when it receives an "on" command...>>
 
Phil

Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
  • Follow-Ups:
Home | Main Index | Thread Index
Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.