[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: OT USB Scanner stops working after a few scans
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: OT USB Scanner stops working after a few
scans
- From: "Kenneth Watt" <kennwatt@xxxxxxx>
- Date: Fri, 21 Sep 2001 20:56:42 +0100
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> -----Original Message-----
> From: paul.murgatroyd@xxxxxxx
>
> 3. None of the above have worked for me - I suspect what I will have
> to do is buy a bigger power supply (its my own fault - I've got an
> Athlon 1000, with 6 expansion cards, two hard drives and two CD-ROM
> drives and only a 230 Watt PSU!)
>
I'm now running an Athlon 1400, with 2 IDE CD ROM drives (one is a 24
speed TDK Cyclone writer) and Adaptec card running a Zip 100, Pioneer
DVD, 2* UW SCSI drives, oh, and a 13GB IDE drive for good measure off a
300W PSU! I also run a Canon N656U scanner powered from one of the USB
ports actually hard onto the mobo, if I try to use it through the extra
USB ports or a generic stack it fails. Canon do recommend that the
scanner is powered *only* from the ports that are on the board.
HTH
K.
Home |
Main Index |
Thread Index
|