|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: RE: Pronto question (and TM13 question)
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: Weather Station
- To: ukha_d@xxxxxxx
- Subject: Re: Re: Weather Station
- From: "Paul Gordon" <paul_gordon@xxxxxxx>
- Date: Mon, 08 Apr 2002 11:06:13 +0100
- Delivered-to: ukha_archive@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
OOH! - Patrick, - something you're working on then?... (and not telling us
about!!)
Paul G.
>From: "PatrickLidstone" <patrickl@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: ukha_d@xxxxxxx
>Subject: [ukha_d] Re: Weather Station
>Date: Mon, 08 Apr 2002 09:32:10 -0000
>
>
>Quasar electronics (www.quasarelectronics.com) do a cheap 4 channel
>serial temp sensor. A homeseer thermostat plug-in is in the works
for
>their board.
>
>Patrick
>
>--- In ukha_d@y..., "Stainton-James, Mark (London)"
<stainmar@e...>
>wrote:
> > Dallas 1-wire could be the solution you want, but from want
you
>have said
> > don't but the weather station. Buy the temp sensors, these
connect
>via CAT
> > 5 and some one (sorry can't remember who) has built a 1-wire
hub
>they sell
> > to avoid having to daisy chain the sensors - you could always do
a
> > combination. There is loads of software available to do
want you
>want, or
> > you could write something your self.
>
_________________________________________________________________
Home |
Main Index |
Thread Index
|
|