|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: SliMP3 or Audiotron owners wanting display capability |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: VIA Network MP3 Project
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: VIA Network MP3 Project
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Wed, 10 Apr 2002 00:21:39 +1200
- Delivered-to: ukha_archive@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Would a playstation psu supply the required voltages, as they are
designed
to run fanless, and can be bought very cheaply?
Des
> -----Original Message-----
> From: paul_watkin [mailto:paul_watkin@xxxxxxx]
> Sent: Wednesday, April 10, 2002 00:15
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: VIA Network MP3 Project
>
>
> I might not have explained myself clearly, use the external PSU
from
> a Laptop (the omnibook I am using has a 19V 3.16A PSU) AND build a
> small board to go into the case of the end product.
>
> You then need to derive the various ATX PSU voltages (+12V, +5V,
> +3.3V, 0, -5V, -12V I think, not 100% though?) using regulators
which
> shouldn't be too difficult or expensive and then attach the Molex
> connector.
>
> As there would be no drives in the system (highest current draw
item,
> especially on startup) this should be more than capable.
>
> Not aware of anything special about an ATX PSU, but not 100% sure.
>
> The big advantage of this is you don't need to play with 240V
mains
> inside whatever you are building. The HP ePC uses an external
power
> supply in a similar way.
>
> Cheers
>
> Paul
> --- In ukha_d@y..., "Phil Harris" <phil@a...>
wrote:
> >
> > > Yup that solution would work - only problem is I don't
have
> > > any laptop psu's nor the knowledge to put a regulator on it
-
> > > i'd end up blowing it up. Anybody care do take this on?
> >
> > No it wouldn't ... Laptops don't have a PCB inside to take
the
> output
> > from an external PSU and convert it into an "ATX mainboard
friendly"
> > format.
> >
> > Phil
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Yahoo! Groups
Sponsor |
ADVERTISEMENT
|
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|