[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: I was doing _so_ well....
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: I was doing _so_ well....
- From: "Nikola Kasic" <nikola@xxxxxxx>
- Date: Tue, 9 Apr 2002 16:04:33 +0100
- Delivered-to: ukha_archive@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
That's
exactly what I'm getting. So, no improvement yet.
I
checked on Linksys site yesterday, but no new versions of software are
available.
Nik
On 9 Apr 02, at 12:06,
Nikola Kasic wrote:
> O.K.
> I'll try it again tonight. I
tried it and I could connect, but it
> couldn't save any
changes.
Ahhh, I don't think I actually made any changes. ISTR
something
about the ReadWrite and ReadOnly passwords being the wrong
way round. Maybe it's in R/O mode?
The UI for this is chronic.
The
tabbing order in some places is well
out of whack and the new way of
inputting WEP keys is pants. The
control needs some
work.
Stuart
> -----Original
Message-----
> From: Stuart Booth
[mailto:stuart@xxxxxxx]
> Sent: 08 April 2002
22:39
> To: ukha_d@xxxxxxx>
Subject: [ukha_d] Re: I was doing _so_ well....
>
>
> On 25 Mar 2002, at 12:31, Nikola Kasic wrote:
>
> > This is what I got from Linksys support, related
to
our SNMP
> > problem... So it's not just us.
>
> This worked ! I think it was Ian Oliver that suggested
it
again
> today, so whilst setting up the FujiTab, I gave
it a
go.
>
> I restored defaults via
USB.
> I changed my usual settings, but avoided
passwords,
and applied. No
> luck connecting via SNMP;
<blank>,
"admin", nor "public" I set the
> READ/WRITE password to
"public". I did NOT set the Read Only
> password (at this
stage). I was then able to connect via SNMP using
> the
p/w
"public".
>
> Dare I change it to something else?
I'm
sick fed up of pumping in
> the WEP keys over and over to
make sure they're all the same. Should
> have remembered
my
keyphrase that I used to generate the code in the
> first
place I guess.
>
> Stuart
>
>
> > -----Original Message-----
>
>
From: Doug Watson [mailto:dwatson@xxxxxxx]
> > Sent:
25 March 2002 10:29
> > To: 'Nikola
Kasic'
> > Subject: RE: I was doing _so_ well....
{02}
> >
> >
>
> Hello,
> >
> > apparently
what
you are experiencing is a bug that they are
> working
>
on, but in the mean time, using the USB please try and
>
re-assign > public as the password, now try the SMTP
connection
> again, let us know > how you get on
please.
> > With Best Regards >
> Doug Watson >
><dwatson@xxxxxxx>< > +++++++Linksys
European
> Support Centre+++++++ > ++Tel ++ 44 870 739
39
39 Fax ++ 44 739 39
> 38++ > >
-----Original Message----- > From: Nikola
Kasic
> [mailto:nikola@xxxxxxx] > Sent: 21
March 2002 15:38 > To:
> dwatson@xxxxxxx
> Subject: RE: I was doing _so_ well....
{02}
> > > > I tried "public"
because
that's in the manual, but didn't
> work. Over
> the > phone, you told me that it's "admin" but
didn't
> work either. > Doesn't matter,
because I changed it using USB
> config. >
I
did all that earlier, and I'm stuck at the same point
>
like
these > guys.: > > > Now when I try to
connect, it just
> gives "Access point not found"
> if I > used > > the
CORRECT
> password, - but interestingly, if I supply a
wrong
> password >
> deliberately, the error
message is "Not an authorised >
password,
>
please > check"... - this seems to indicate that it is >
actually
> talking to the > WAP11, >
>
to check the password.... > > And
> the
*exact* same results here. > > Regards, >
Nik
>
> -----Original Message-----
> From: Doug Watson
>
[mailto:dwatson@xxxxxxx] > Sent: 21 March 2002
15:01 >
> To: 'Nikola Kasic'
> Subject: RE: I was doing _so_ well....
{02}
> > > > the defualt
password is "public" let me know if that helps
> you out
> if > not we'll move it on from there...
>
> With
> Best Regards
> Doug Watson >
><dwatson@xxxxxxx>< >
> +++++++Linksys European Support Centre+++++++
> ++Tel ++ 44 870
> 739 39 39
Fax
++ 44 739 39 38++ > >
-----Original
Message-----
> >
From: Nikola Kasic [mailto:nikola@xxxxxxx]
> Sent:
> 21 March
2002 10:36 > To: dwatson@xxxxxxx
> Subject:
> FW: I
was doing _so_ well.... {02} > >
> Hi Douglas,
>
> We spoke on the
phone
a few days ago and you asked me to send me >
> an > e-mail regarding my
problem with SMTP config util, so you
> can forward >
it
to USA. > I found that there are, at
least 2
> more people experiencing
> exactly > the same problem as
me.
>
> Please see
below,
I did exactly the same as these two guys and
>
> got the > same result. >
> Please let me know if
you
> have any ideas or fix for this
> problem. >
> Regards, >
>
> Nik >
> -----Original Message-----
> From:
>
BadMsgQ@xxxxxxx [mailto:BadMsgQ@xxxxxxx]On
> Behalf
> Of
Stuart
Booth Sent: 20 March 2002 19:58 To: nikola
> kasic
> Subject:
[habuy] I was doing _so_ well.... {02} > >
> On 20
> Mar
2002,
at 13:55, Paul Gordon wrote: > >
> When I connected
> earlier, I'm sure I had not set
any
SNMP > password > at
all,
> > > and
just used <blank> when I connected via SNMP... >
>
> Ditto, on the
original
firmware/software supplied with the >
> WAP11. I connected fine with SNMP *before* flashing
and
updating >
> the s/w.
>
> > Subsequently, I've set both a
read/write
> and a read-only
> password in > the USB
> > config
>
utility, on the "security" tab, then the "Password
> setting"
> >
button... > > and applied that to
the AP... > >
After
> getting the not authorised p/w message, I did the
same ... > >
> >
Now
when I try to connect, it just gives "Access point not
>
> found" if > I
used
> > the CORRECT password, -
but
> interestingly, if I supply a wrong > password
> >
>
deliberately, the error message is "Not an authorised
>
> password, >
please
> > check"... - this seems to
indicate that
> it is actually talking
> to > the WAP11,
> > to check
>
the
password.... > > And the *exact*
same results here. > >
> > I thought the latest firmware
was
supposed to fix the "Access
>
> point > not
> > found" error via SNMP?? -
that's
what it
> says in the release
> notes > for it!!
> >
> > Any
>
tips/pointers anyone? > > I'd
never
even known what SNMP was
> until the other day, so so
> far I'm at a loss myself. >
>
> Stuart >
> --
> Stuart Booth
> Somewhere in
>
Buckinghamshire, England, UK > > > > >
>
--habuy-------------------------------------------------------------
>
- > If you want to get off this list :- send a PLAIN TEXT email to
>
> mdaemon@xxxxxxx with the first line of the
body:- UNSUBSCRIBE >
> habuy [address] > >
--POWERED BY
>
MDAEMON!------------------------------------------------ >
>
>
>
> --
> Stuart
Booth
> Somewhere in Buckinghamshire, England, UK
>
> stuart@xxxxxxx ICQ#:
4515603
>
>
Yahoo! Groups
Sponsor
>
ADVERTISEMENT
>
>
>
>
> For
more
information: http://www.automatedhome.co.uk
>
Post message: ukha_d@xxxxxxx> Subscribe:
ukha_d-subscribe@xxxxxxx> Unsubscribe:
ukha_d-unsubscribe@xxxxxxx> List owner:
ukha_d-owner@xxxxxxx>
> Your use of Yahoo!
Groups is subject to the Yahoo! Terms of Service.
>
>
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|