FW: I was doing _so_ well.... {02}

["Nikola Kasic" <nikola@xxxxxxx>]

Thanks Doug,

Keep me posted, please. I'm in contact with few more users (about 30) who bought the same AP with me and I keep them updated to save you from being bombarded with the mails on the same topic.

Cheers,

Nik

-----Original Message-----
From: Tech Team [mailto:dwatson@xxxxxxx]
Sent: 09 April 2002 15:46
To: 'Nikola Kasic'
Subject: RE: I was doing _so_ well.... {02}

no, the only thing I got from them was to RMA the unit - but I don't think this will resolve your issue- I'm still chasing this up for you...

 

Best Regards,
Doug Watson
><dwatson@xxxxxxx><
++++++++ Linksys European Support Centre ++++++++
+ Tel: ++44 (0) 870 7393939  Fax: +44 (0) 870 7393938 +

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 08 April 2002 11:48
To: dwatson@xxxxxxxSubject: RE: I was doing _so_ well.... {02}

Any news on this Doug?

Are they close to resolve it. I found even more people with the same problem. Problem is that you can restrict access to AP from specified MAC addresses through SNMP util only. And I don't want to leave AP "open". Encription is not a strong protection.

Regards,

Nik

-----Original Message-----
From: Doug Watson [mailto:dwatson@xxxxxxx]
Sent: 25 March 2002 14:38
To: 'Nikola Kasic'
Subject: RE: I was doing _so_ well.... {02}

I'd replicate it if I'd not blown up our test unit - put the wrong psu in it! :(

 

With Best Regards
Doug Watson
><dwatson@xxxxxxx><
+++++++Linksys European Support Centre+++++++
++Tel ++ 44 870 739 39 39 Fax ++ 44 739 39 38++

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 25 March 2002 12:43
To: dwatson@xxxxxxxSubject: RE: I was doing _so_ well.... {02}

I will.

Tonight, when I come home.

But if it's a known bug, you should be able to replicate it there. It doesn't require any special configuration. 

Anyway, I'll let you know, how it works on my system.

Nik

-----Original Message-----
From: Doug Watson [mailto:dwatson@xxxxxxx]
Sent: 25 March 2002 10:29
To: 'Nikola Kasic'
Subject: RE: I was doing _so_ well.... {02}

Hello,

 

apparently what you are experiencing is a bug that they are working on, but in the mean time, using the USB please try and re-assign public as the password, now try the SMTP connection again, let us know how you get on please.

 

With Best Regards
Doug Watson
><dwatson@xxxxxxx><
+++++++Linksys European Support Centre+++++++
++Tel ++ 44 870 739 39 39 Fax ++ 44 739 39 38++

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 21 March 2002 15:38
To: dwatson@xxxxxxxSubject: RE: I was doing _so_ well.... {02}

I tried "public" because that's in the manual, but didn't work. Over the phone, you told me that it's "admin" but didn't work either.

Doesn't matter, because I changed it using USB config.

I did all that earlier, and I'm stuck at the same point like these guys.:

 

> Now when I try to connect, it just gives "Access point not found" if I used
> the CORRECT password, - but interestingly, if I supply a wrong password
> deliberately, the error message is "Not an authorised password, please
> check"... - this seems to indicate that it is actually talking to the WAP11,
> to check the password....

And the *exact* same results here.

Regards,

Nik

-----Original Message-----
From: Doug Watson [mailto:dwatson@xxxxxxx]
Sent: 21 March 2002 15:01
To: 'Nikola Kasic'
Subject: RE: I was doing _so_ well.... {02}

the defualt password is "public" let me know if that helps you out if not we'll move it on from there...

 

With Best Regards
Doug Watson
><dwatson@xxxxxxx><
+++++++Linksys European Support Centre+++++++
++Tel ++ 44 870 739 39 39 Fax ++ 44 739 39 38++

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 21 March 2002 10:36
To: dwatson@xxxxxxxSubject: FW: I was doing _so_ well.... {02}

Hi Douglas,
We spoke on the phone a few days ago and you asked me to send me an e-mail regarding my problem with SMTP config util, so you can forward it to USA.
I found that there are, at least 2 more people experiencing exactly the same problem as me.
Please see below, I did exactly the same as these two guys and got the same result.

Please let me know if you have any ideas or fix for this problem.

Regards,

Nik

-----Original Message-----
From: BadMsgQ@xxxxxxx [mailto:BadMsgQ@xxxxxxx]On Behalf Of
Stuart Booth
Sent: 20 March 2002 19:58
To: nikola kasic
Subject: [habuy] I was doing _so_ well.... {02}


On 20 Mar 2002, at 13:55, Paul Gordon wrote:

> When I connected earlier, I'm sure I had not set any SNMP password at all,
> and just used <blank> when I connected via SNMP...

Ditto, on the original firmware/software supplied with the WAP11. I
connected fine with SNMP *before* flashing and updating the s/w.

> Subsequently, I've set both a read/write and a read-only password in the USB
> config utility, on the "security" tab, then the "Password setting" button...
> and applied that to the AP...

After getting the not authorised p/w message, I did the same ...

> Now when I try to connect, it just gives "Access point not found" if I used
> the CORRECT password, - but interestingly, if I supply a wrong password
> deliberately, the error message is "Not an authorised password, please
> check"... - this seems to indicate that it is actually talking to the WAP11,
> to check the password....

And the *exact* same results here.

> I thought the latest firmware was supposed to fix the "Access point not
> found" error via SNMP?? - that's what it says in the release notes for it!!
>
> Any tips/pointers anyone?

I'd never even known what SNMP was until the other day, so so far
I'm at a loss myself.

Stuart

--
Stuart Booth
Somewhere in Buckinghamshire, England, UK

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.