The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Polaron update (was C_Bus)


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: buzz buzz buzz - I wonder why it does?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: buzz buzz buzz - I wonder why it does?
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Mon, 15 Apr 2002 18:42:36 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

What is the power rating ?
Physically how big is it ?
 
By the sounds of what you describe it is just an adapter with a Diode in series which will not reduce the voltage but give power for 50% of the time. Some appliances (notable heater type things like Irons) would be OK with this but anything with a transformer will complain bitterly as you describe.
 
WORSE STILL.... the transformer core will become saturated and cease to be an inductor, at which point there is nothing to limit the rise of current and it can self destruct :-(
 
You need to supply more info but until then ....DONT USE IT.
 

Keith

www.diyha.co.uk
www.kat5.tv

-----Original Message-----
From: BUTLER, Tony, FM [mailto:tony.butler@xxxxxxx]
Sent: 15 April 2002 16:17
To: 'ukha_d@xxxxxxx'
Subject: [ukha_d] buzz buzz buzz - I wonder why it does?

Peeps,

I bought a parasound audio amp from a chap in the states recently &
naturally it's 110v.
I have a suitable converter (from craplin I think it was) - a two socket
cylinder jobbie, which has a higher power rating than the usual wall wart
type step down transformers I use.
Anyway, the amp buzzes rather annoyingly when plugged in & I don't know if
it's the amp or the step down converter causing the problem.
I don't have any other 110v amps to try with the transformer, though I did
use my audiotron & had no problems with that.
Also, I don't want to try my other transformers with the amp as they do not
have a high enough power rating - also, I think they might only support the
two identical pin type connectors rather than the one larger than the other
type....

I know it's a bit vague, but any ideas how I can identify what the problem
might be?

cheers,


Tony


********************************************************************
      Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.