|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: [OT] Tivo Convergence |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: (ukha_d) Psion Wavefinder - Streaming to iPAQ
- To: ukha_d@xxxxxxx
- Subject: RE: (ukha_d) Psion Wavefinder - Streaming to
iPAQ
- From: peter.white@xxxxxxx
- Date: Wed, 17 Apr 2002 23:18:13 +0100
- Delivered-to: ukha_archive@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Err - Calum - I'm trying to help someone else (remotely) get their wf
working
under XP home. I've suggested all the usual (as shown below) but it's
still not
working for him. Any other ideas?
Pete
---------
1. Uninstall any wf software, or better still, use the rollback feature in
XP to
be sure all remnants are removed.
2. Install the Psion s/w using the autoloader from the CD. This is
probably
v1.2 (1.4 is available, but 1.2 works for me).
3. Have the wf plugged directly into a motherboard USB port (ie the back
of
the
PC) if possible. This assumes you have a window near your PC.
4. Ideally your window should face towards your nearest DAB transmitter
-
this
can make a very big difference. Not sure what the website is, but
there is
one
that'll tell you where it is. If you're within 60 miles of London, point
it
in
that direction.
5. Have it bolt upright, make sure the antenna are screwed in tight
(obvious, I
know). The DAB frequency is on a very narrow band, so the length of
the
aerial
is critical (57cm's I think)
6. Ideally it should be a clear day. Rain/fog will reduce the
signal
strength.
7. Let the Psion s/w do the signal strength and search, then close it.
8. Install DABBAR 1.3 (1.3a is available, but 1.3 works for me)
9. Run the DABBAR search
-----Original Message-----
From: MIME:mark@xxxxxxx at INTERNET
Sent: 17 April 2002 22:58
To: White, Peter; ukha_d@xxxxxxx at Internet
Subject: [ukha_d] Psion Wavefinder - Streaming to iPAQ
OK..got my wavefinder and got it going under XP (thanks Calum).
I can stream DAB radio nicely across my LAN now. I've tried it on
the
iPAQ too but it doesn't know what to do with either of the files WinDAB
or DabBar produce (.m3u & .pls)
Is there an iPAQ version of any winamp compatible software to play
these
with?
Thanks
M.
_____________________________________
The UKs Premier Home Automation Site
http://www.automatedhome.co.uk
_____________________________________
For more information: http://www.automatedhome.co.uk
Post message:
ukha_d@xxxxxxx Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
.
Yahoo! Groups
Sponsor |
ADVERTISEMENT
|
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|