The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: 802.11a deregulation


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: (ukha_d) Psion Wavefinder - Streaming to iPAQ


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: RE: (ukha_d) Psion Wavefinder - Streaming to iPAQ
  • From: "Stuart Worrall" <stuart@xxxxxxx>
  • Date: Thu, 18 Apr 2002 00:04:33 +0100
  • Delivered-to: ukha_archive@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Ive found the Win2k USB drivers here is anyone needs them..

http://simans.worldonline.co.uk/windab/w2kusb.zip

Thanks


Stu Worrall
stu@xxxxxxx


-----Original Message-----
From: Mark McCall [mailto:mark@xxxxxxx]
Sent: 17 April 2002 23:41
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] RE: (ukha_d) Psion Wavefinder - Streaming to iPAQ


This is what we did to get it running without stuttering and looping...
http://www.uk-dab.info/usbdrivers.html

M.

_____________________________________
The UKs Premier Home Automation Site http://www.automatedhome.co.uk
_____________________________________



-----Original Message-----
From: peter.white@xxxxxxx [mailto:peter.white@xxxxxxx]
Sent: 17 April 2002 23:18
To: ukha_d@xxxxxxx Subject: [ukha_d] RE: (ukha_d) Psion Wavefinder - Streaming to iPAQ


Err - Calum - I'm trying to help someone else (remotely) get their wf
working under XP home.  I've suggested all the usual (as shown below)
but it's still not working for him.  Any other ideas?

Pete

---------
1. Uninstall any wf software, or better still, use the rollback feature
in XP to be sure all remnants are removed. 2. Install the Psion s/w
using the autoloader from the CD.  This is probably v1.2 (1.4 is
available, but 1.2 works for me). 3. Have the wf plugged directly into a
motherboard USB port (ie the back of the
PC) if possible.  This assumes you have a window near your PC. 4.
Ideally your window should face towards your nearest DAB transmitter -
this can make a very big difference.  Not sure what the website is, but
there is one that'll tell you where it is. If you're within 60 miles of
London, point it in that direction. 5. Have it bolt upright, make sure
the antenna are screwed in tight (obvious, I know).  The DAB frequency
is on a very narrow band, so the length of the aerial is critical
(57cm's I think) 6. Ideally it should be a clear day.  Rain/fog will
reduce the signal strength. 7. Let the Psion s/w do the signal strength
and search, then close it. 8. Install DABBAR 1.3 (1.3a is available, but
1.3 works for me) 9. Run the DABBAR search

-----Original Message-----
From: MIME:mark@xxxxxxx at INTERNET
Sent: 17 April 2002 22:58
To: White, Peter; ukha_d@xxxxxxx at Internet
Subject: [ukha_d] Psion Wavefinder - Streaming to iPAQ


OK..got my wavefinder and got it going under XP (thanks Calum).

I can stream DAB radio nicely across my LAN now.  I've tried it on the
iPAQ too but it doesn't know what to do with either of the files WinDAB
or DabBar produce (.m3u & .pls)

Is there an iPAQ version of any winamp compatible software to play these
with?

Thanks

M.


_____________________________________
The UKs Premier Home Automation Site http://www.automatedhome.co.uk
_____________________________________



For more information: http://www.automatedhome.co.uk Post message:
ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/


.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.