The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Where can I buy ?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: cables. was HA system networks


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: cables. was HA system networks
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Fri, 26 Apr 2002 21:58:03 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

For BROADCAST TV ....YES

for domestic AV source equipment ....NO

You are correct when you say it is the receivers capabilities that determine
whether or not you receive Stereo sound but ONLY if the source of that
signal is in NICAM stereo. You can spend as much money as you like on the
best colour TV in the world, but if the broadcaster puts on a Black & White
movie then you will only see it in B&W.

NICAM Digital Stereo is generated by an expensive encoding chipset and then
modulated onto a subcarrier of the RF frequency used for the main TV signal.

A NICAM Encoder will cost more than a reasonable quality VCR therefore the
modulators used to provide the RF output from VCR & Satellite receivers are
mono. (Typically they can be bought retail for just over a fiver so probably
only cost a quid or so the the AV manufacturers in the volumes they buy)

The SCART socket outputs high quality video signals and Stereo audio. KAT5
provides the means to distribute this signal over long distances with no
degradation.

It also doesnt suffer from interference from other channels which happens
all to frequently with UHF distibution particularly during the summer
months. Read more at www.kat5.tv particularly the section about "Taboo TV".

Keith

www.diyha.co.uk
www.kat5.tv


-----Original Message-----
From: siu98pd [mailto:siu98pd@xxxxxxx]
Sent: 26 April 2002 14:17
To: ukha_d@xxxxxxx Subject: Re: cables. was [ukha_d] HA system networks


> Depends on what quality you're after.  The KAT5 modules offer perfect
> quality transmission with stereo audio, whereas coax will send reasonable
> quality pictures and mono sound.  If I had the money, I'd use KAT5.  I
don't
> so I'll use coax (sorry Keith - pray for a pay rise for me).

sorry, don't follow this.

I thought audio and video is transmitted via the co-ax and it's upto the
recevier (tv in this case) to decode the audio/video and playback as
necesssary depending on the tv's capabilities?


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.