The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Festoon Lighting


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cabling Question



Sorry Mal but you're not 100% correct.

You are allowed to install power and lighting circuit cabling without any
protection as long as it runs either vertically or horizontally from a
socket or switch, or if it is with 150mm? of a ceiling or a corner, IIRC.
If you decide to run it diagonally across a wall or through a wall and up
the other side as I have done on several occasions then you are required to
protect it .

My plasterer wasn't very happy when I told him that I wasn't obliged to cap
the majority of my cables.
He advised that I should cap the cabling in order to avoid any damage being
done it whilst he was plastering.
I used cheap galvanised capping which is very easy to cut and fix and should
offer enough resistance to a masonry drill for people to realise that there
is a cable in the wall.

Tracey


Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.