The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Re: Does the following landline phone exist?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How hot is your CAT5


  • To: ukha_d@xxxxxxx
  • Subject: Re: How hot is your CAT5
  • From: "graham_howe" <graham@xxxxxxx>
  • Date: Mon, 19 Aug 2002 13:34:38 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@y..., john.benfield@u... wrote:
>
> I'm planning my CAT5 runs at present and I have not idea what the
> temperature operating limits are for CAT5. Some of the cable will
be laid
> in trucking in the insulation in the ground floor, with under floor
> heating above it. The UFH will run at 45oC, but I've no idea what
the
> temperature in the trucking will get to. Given the temperatures
that some
> building risers I've been in get to, I suspect that I don't need to
worry.
> Any ideas?
>
I have lots of my cable lying along side the central heating pipes,
quite simply in my house there was no viable alternative. I also have
lots of cable running alongside mains and coax cable, again because
there was no alternative. Every single one of the 88 ports works fine
and everything has been in place for more than 18 months now. So all
I can say is I have had no problems in NOT following the guidelines.
YMMV.

Graham


Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.