The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Cheap CompactFlash Wifi Card...


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: SOM1 relay board switching sound.


  • To: ukha_d@xxxxxxx
  • Subject: RE: Re: SOM1 relay board switching sound.
  • From: ian.bird@xxxxxxx
  • Date: Fri, 23 Aug 2002 17:08:32 +0200
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

My board is pretty dum as it stands, no brains at all. It is designed to
connect to a micro controller though which can have as many smarts as you
want. Amar is putting together a list of features he would like, please feel
free to contribute. I plan to keep the first release simple but the hardware
will be the same. Changes in spec will be in the removable PIC chip.

It will be connectable by RS485 as this is my favourite bus at the moment. I
will probably make it 485 only (or maybe dual but either or not both). I
will then use a serial to 485 converter. That is a way away yet, lets walk
before we start running.

Ian

Ciba Vision (UK) Ltd
Tel:+44(0)1489 775570
Fax:+44(0)1489 779570
E mail: ian.bird@xxxxxxx

> -----Original Message-----
> From: justin@xxxxxxx [mailto:justin@xxxxxxx]
> Sent: 23 August 2002 15:47
> To: ukha_d@xxxxxxx > Subject: RE: [ukha_d] Re: SOM1 relay board switching sound.
>
>
> Thanks everyone.
>
> Just to clarify, the CAT5 connection is effectively a
> headphone extension lead.
> I was working in the principal that if the ground wire (in
> this case w/o & w/g
> connected together) were cut there would be no sound. Using a
> relay as a switch
> seemed to make sense. As this does not work as expected, I
> would imagine the
> relays aren't the right sort as Ian described.
>
> Ian,
>
> I can hear the relays switching over so I assume they are
> doing what they are
> supposed to.
> The thing that appealed to me about the SOM1 board was the expansion
> capabilities using RS485. Will yours do that? Either way, I
> would be very
> interested.
>
> BTW, I don't like the way the relays are operated on the
> SOM1. You have to send
> the status of all the relays when you want to change just
> one. I hope your unit
> wont do that!
>
> Cheers,
> Justin.

>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> 4 DVDs Free +s&p Join Now
> http://us.click.yahoo.com/pt6YBB/NXiEAA/mG3HAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
> http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.