|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Color Kinetics PSU's & Stuff
- To: <ukha_d@xxxxxxx>
- Subject: Color Kinetics PSU's & Stuff
- From: "Rob Mouser" <rmouser@xxxxxxx>
- Date: Thu, 12 Dec 2002 08:43:48 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi All
One for all you electronics wizards!
Thanks to some sterling work by Ian on his BB I will soon have enough
cove lights to start "The Hall" project. Which involves running
the
lights around the entire hallway area. A few questions though:
1) Is it safe to run the DMX cable with
the power feeds to each
unit.
2) I assume the DMX outputs of each
light can just daisy chain
together?
3) Would I be able to purchase one or
two beefier PSU's to cut
down on my wiring. What spec would I need?
4) Are there any limitations on cable
length at the 12v and DMX
end?
5) Anyone got any bright ideas for a
wiring loom or 3core cable
that I could use. Small and flexible would be important criteria.
Then all I'll need is that DMX controller. Link it to c-bus and hey
presto!
Many thanks
Rob Mouser
rmouser@xxxxxxx <mailto:rmouser@xxxxxxx>
rob@xxxxxxx <mailto:rob@xxxxxxx>
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|