|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: Re: [OT] Can i do anything about poor evening Broadband ?
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Regulated voltage higher than unregulated?
- To: <ukha_d@xxxxxxx>
- Subject: RE: Regulated voltage higher than unregulated?
- From: "Tony T" <tony@xxxxxxx>
- Date: Sat, 14 Dec 2002 19:18:46 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
>
Normally with unregulated wall warts the unloaded
> voltage is much higher so for instance the unregulated 9v
> would be approx 13-14 volts...So i would say it would be ok
> to use a regulated 12v for your 9v -10v unregulated........
Thanks, Frank
I'll give it a go shortly, and see what happens....
I brought a couple of AT power supplies (as they have a switch, unlike
atx) to sit in node 0 and provide power to the various dc based units
(e.g. kat5's, bx24-aht etc). I've recently run out of power sockets
(everything runs off one power outlet with 2 x multi-sockets at the
moment!)
Regards
Tony
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|