|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: Re: Hard Drives |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Fw: Kinetic Colour Cove lights - wiring question
- To: ukha_d@xxxxxxx
- Subject: Fw: Kinetic Colour Cove lights - wiring
question
- From: Gareth Cook <g@xxxxxxx>
- Date: Mon, 16 Dec 2002 09:42:04 +0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
excellent !
top man
G.
Gareth Cook
Technical Consultant
IBM Early Deployment
Lotus Park, Staines, TW18 3AG
Office: +44 (0) 1784 445 166
Mobile: +44 (0) 7980 445 166
Fax: +44 (0) 1784 499 166
Work: g@xxxxxxx
Personal: g@xxxxxxx
AIM Chat : TheBoyG
MSN Chat : chat@xxxxxxx
----- Forwarded by Gareth Cook/UK/IBM on 16/12/2002 09:52 -----
Discussion
Main Topic
"Bricknell, Tony" <tony.bricknell@xxxxxxx>
Today 09:43
.
Subject:
.
RE: [ukha_d] Kinetic Colour Cove lights - wiring question
.
Category:
The Red and Black wires are for 24Vdc power - rather conventionally
colored
(sic) Red:+24V Black:0V
The third (blue) wire is for DMX control. Roll on Ian's PIC
controller
with
programmable colourwash, etc....
As for cable type - as long as it can take the current consumption
(which,
going on distant memory, is circa 0.3A each) then yes, mains flex is
fine.
HTH
-----Original Message-----
From: Gareth Cook [mailto:g@xxxxxxx]
Sent: 14 December, 2002 18:05
To: ukha_d@xxxxxxx
Subject: [ukha_d] Kinetic Colour Cove lights - wiring question
On the actual cove lights themselves they are three cables - and all the
diagrams I can see only mention plugging in two - but not which ones !
Can anyone enlighten me as to which two I should be connecting to the PSU
module ? And is using standard 3way mains flex ok ?
Thanks !
G.
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|