The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: 1/2" or 15mm


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Recommended whole-house audio dist amp?


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: Recommended whole-house audio dist amp?
  • From: "BUTLER, Tony, FM" <tony.butler@xxxxxxx>
  • Date: Fri, 1 Feb 2002 10:56:52 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Phil,
 
I'm in Surrey, so not exactly neighbours :) 
 
Keith has explained to my KAT5 list persona that it's because I'm now double terminated (oh-er missus!) & he's gonna tell me which wire to cut in my Tx unit to get back to single termination..
In the mean time, I have taken the unusually simplistic route of turning up the birghtness on the TV :-]
Would of course prefer an X10 solution involving relays switching brightness circuits in/out as <insert favourite HA controller here> detects a change from an RF input to an EXT input on the TV, but what the hey - can't have everything :D
 
Tony
-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 01 February 2002 10:41
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Recommended whole-house audio dist amp?


Tony,

Where are you located? I'm Winchester if that's any use as you seem to
be having some issues with brightness ... Just thought that maybe two
heads might be better than one!

Phil

> -----Original Message-----
> From: BUTLER, Tony, FM [mailto:tony.butler@xxxxxxx]
> Sent: 01 February 2002 10:29
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] Recommended whole-house audio dist amp?
>
>
> Keith already has audio and video distribution modules done.
> What is missing currently is a switching unit to play
> different sources in different rooms, or the same source in a
> no. of rooms.
>
> There is no amplification involved here - you supply your own
> at the destination end. The current standard KAT5 modules are
> terminated with SCART sockets, though he can do custom units
> with phono's or whatever if you want to plug into an amp
> rather than a TV. If you run all from a central amp then
> there may be losses in the speaker cables and, where
> relevant, video cables.  With Kat5 the losses should be negligible.
>
> My Linn system is such that each zone/room has it's own amp
> which is hidden (in kitchen cupboards, under the floorboards
> etc) near to the ceiling speakers to keep the unbalanced runs
> as short as possible.
>
> My video is, however, distributed from a central point via an
> AV amp and it does suffer from an 8m run of SVideo to the
> main TV....which is why I am experimenting with KAT5 to
> replace the unbalanced video feed.....
>
> Tony
>
> -----Original Message-----
> From: Chris Bond [mailto:chris@xxxxxxx]
> Sent: 01 February 2002 10:11
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] Recommended whole-house audio dist amp?
>
>
> I take it from peoples comments that Keith is building a CAT5 Audio
> Modular.....?
>
> I want to have two speakers in the corner of each room all
> linked up to a
> central distribution for the whole house.  Ie. you can turn
> each room on
> and off.....
>
>
>
> ********************************************************************
>       Visit our Internet site at http://www.rbsmarkets.com
>
> This e-mail is intended only for the addressee named above.
> As this e-mail may contain confidential or privileged
> information, if you are not the named addressee, you are not
> authorised to retain, read, copy or disseminate this message
> or any part of it.
> ********************************************************************
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~--> Get your FREE credit report with a
> FREE CreditCheck Monitoring Service trial
> http://us.click.yahoo.com/ACHqaB/bQ8CAA/ySSFAA> /IBOolB/TM
>
>
> --------------------------------------------------------------
> -------~->
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.