[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Phone via CAT5
- To: ukha_d@xxxxxxx
- Subject: Phone via CAT5
- From: "steevc" <steevc@xxxxxxx>
- Date: Mon, 11 Feb 2002 21:05:10 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On my suggestion my Dad installed some CAT5 whilst renovating his
flat. He has 2 runs from each room back to the meter cupboard. He's
bought the B&Q 12 way patch panel and some sockets, but what he
really needs from it at the moment is a way to get a phone connection
>from
next to the NTL phone point so he can run something between them.
Is there a standard way to connect phone wires to CAT5? My sockets
only seem to use 2 wires. Is that all you need?
Can you get cheap in-line convertors to plug in an RJ45 socket with a
phone socket on the other end?
The patch panel shows 2 ways of wiring up. They were labeled with a
number followed by A or B. Any reason for 2 standards?
Thanks
Steve
Home |
Main Index |
Thread Index
|