[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: X10 addressing
>> using a single
>> >housecode for all ceiling lights.
>>
>> How would that be an advantage?
>
>Then you can use a single X10 controller to do all the lights rather
>than using an all housecode one and a Pronto...
Good point.
Can't you set up homeseer or home vision etc so that if it receives A1 OFF
then it actuallty sends out B3:Off, L2:OFF etc to each individual light?
Of course, this (presumably) means more X10 traffic & obviously the
assumption that you have said uber-controller in the first place.....
Tony
********************************************************************
Visit our Internet site at http://www.rbsmarkets.com
This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************
Home |
Main Index |
Thread Index
|