[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: X10 addressing
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: X10 addressing
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Mon, 4 Feb 2002 13:01:18 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> Good point.
> Can't you set up homeseer or home vision etc so that if it
> receives A1 OFF then it actuallty sends out B3:Off, L2:OFF
> etc to each individual light? Of course, this (presumably)
> means more X10 traffic & obviously the assumption that you
> have said uber-controller in the first place.....
Absolutely ... But I have an IR 543 in the bedroom which when I hit
"All
lights off" shuts down any lights that are still on in the house and
sets the "Gone to bed" flag in HomeVision for later use.
One X10 command taking 1/2 a second rather than 17 or so taking maybe 12
seconds...
Phil
Home |
Main Index |
Thread Index
|