The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Seeking longer IDE cable


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Recommended IR Receivers


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: Recommended IR Receivers
  • From: "Kenneth Watt" <kennwatt@xxxxxxx>
  • Date: Mon, 18 Feb 2002 08:40:23 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yeah, the lounge is South facing Paul and the only wall I could put the
tube on obviously gets reflections as it does not get direct sunlight.
The IR receiver is one of the Buffalo ones though and not the Xantech, I
tried both filters that came with the unit but no joy :-(

The good news is I have used the Xantech table top and Dinky-Link
receivers as well, the Dinky-Links are excellent, no problems at all and
the table top one only misbehaved when it caught (almost) direct
sunlight.

HTH

K.

> -----Original Message-----
> From: psghome2002 [mailto:psghome@xxxxxxx]
> Sent: 17 February 2002 22:33
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Recommended IR Receivers
>
> Do you have the sunlight filter on the receiver in your lounge? Is
> it good enough to filter unwanted IR out? Most of my rooms are south
> facing and get loads of sunlight.
>
> --- In ukha_d@y..., "Kenneth Watt" <kennwatt@b...>
wrote:
> > I can't recommend anything other than the Xantech system, as I
use
> that
> > myself, but I can tell you that it is very good for IR
> distribution, not
> > cheap as you say though. However I had started out on that path
> before I
> > knew of UKHA_D so someone may have an alternative that is more
> wallet
> > friendly. One or two things to watch though are to think very
> carefully
> > about which rooms *actually* need the IR receiver. So long as you
> leave
> > the wiring in place it should be a doddle to add if you need to
at
> a
> > later stage. The other thing is watch where you place the
> receivers; the
> > one in my lounge does not get direct sunlight but still, in the
> evening,
> > picks up stray IR from sunlight :-(
> >
> > K.
> >
> > > -----Original Message-----
> > > From: psghome2002 [mailto:psghome@xxxxxxx...]
> > > Sent: 17 February 2002 21:23
> > > To: ukha_d@y...
> > > Subject: [ukha_d] Recommended IR Receivers
> > >
> > > I've been looking at the Xantech MicroLink IR receivers to
mount
> in
> > > a standard wall plate blank (maybe with a temp sensor as
well).
> Only
> > > trouble is they're pretty expensive when I want to put one
in
> every
> > > room (10 or so). Anyone got a cheaper but equally as good a
> solution?
> > >
> > > Paul.
> > >
> > >
> > > ------------------------ Yahoo! Groups Sponsor
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@y...
> > > Subscribe:  ukha_d-subscribe@y...
> > > Unsubscribe:  ukha_d-unsubscribe@y...
> > > List owner:  ukha_d-owner@y...
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.