The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Loft storage ...


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: LEd Lights


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: LEd Lights
  • From: "Ian B" <Ian@xxxxxxx>
  • Date: Sun, 17 Feb 2002 22:09:31 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Mike

Sorry for the slow reply but things have been hectic. I don't have a
farnell
catalogue at the moment but the Rapid number is 55-1490 for the blue ones.
They are 5mm, very bright, water clear and about 90p each. The green ones
are commonal garden cheap ones, again 5mm.

HTH

Ian

-----Original Message-----
From: Mike Griffiths [mailto:mike@xxxxxxx]
Sent: 09 February 2002 11:34
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LEd Lights


Thanks Ian
You don't have the part # from Rapid ?


Mike
At Home


-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 09 February 2002 11:30
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LEd Lights

They are all single LED's. There are 8 blues and 8 greens in total with a
current draw of about 300ma. Each LED is soldered to the bell wire and has
two layers of heat shrink over it for weather protection. So far so good.

>Looks very good by the way
Thanks. Functional as well. We don't have street lights so are that much
more effective.
Ian

-----Original Message-----
From: Mike Griffiths [mailto:mike@xxxxxxx]
Sent: 09 February 2002 11:01
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LEd Lights


Ian
Looking on your site at the LED lights you have fitted outside
How many Led's in each cluster?
Looks very good by the way
Thanks
Mike
At Home


-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 09 February 2002 10:47
To: Ukha_d
Subject: [ukha_d] For those into PIC programming

Hi everyone

A quick note to tell you about the little PIC development board I have
built. The first one is in action and being used to develop my IR stuff
now.
Essentially it is all the bits needed to run a PIC + an LCD and serial
comms. All this using only 4 I/O ports.

More details and a piccy at:
http://www.mollyology.com/WebPages/Home/Index.htm
then projects - PIC LCD
board. This is aimed at the PIC 16F84, 16F628 and other pin compatible
units. I have the LCD driver program for both the 16F84 and 16F628.

Ian



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.