The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: OT - Grand Designs 21:00; Ch4


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Anyone got a BT 2+8 pabx phone system?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Anyone got a BT 2+8 pabx phone system?
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Thu, 21 Feb 2002 13:44:34 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

ORIGINALLY POSTED LAST NIGHT BUT LOST IN THE ETHER :-(

Reposted with minor corrections :-)


Hi Lee,

Check you have the terminations right.

There are only 5 terminals on the PBX for the 6 terminals in the jack.
3 of them are used for normal phones A,B and Earth. The other 2 are the
data
circuit for system phones.

CCU1 - GREEN/White LJ1
CCU2 - BLUE/White LJ2
n/a - ORANGE/WHITE LJ3
CCU4 - Orange/WHITE LJ4
CCU5 - Blue/WHITE LJ5
CCU6 - Green/WHITE LJ6

The LEDS come on when the phone powers up but go off once the self test
completes. If they stay on then the data isnt getting through.

PBX. Extn 20 is the operator (I think) and it gets all the calls. Others
can
pick the calls up when they ring.

KEY. All phones have incoming and outgoing access to both lines.

EXCLUSIVE. All phones have access to Line 1, Line 2 is exclusive to extn
21.

Recall. Earth used when parented of a larger PBX, Timed Break used for Star
Services on exchange lines.

Ring Bridge. Used to indicate the gap in incoming ringing to stop the
phones
>from
intended when parented off a manual switchboard where only occasional
bursts
of incoming ringing occur.

I think I have got the above facts right....havent worked on one for 6
years
so its from memory.

Will check to see if I still have a manual somewhere.

Keith

-----Original Message-----
From: Lee Varga [mailto:lee@xxxxxxx]
Sent: 20 February 2002 22:40
To: ukha_d@xxxxxxx
Subject: [ukha_d] Anyone got a BT 2+8 pabx phone system?


I just picked one up and and I'm try to set up up
(on the dining room table before it's real installation)
but I'm getting a lot of strange problems like one of the
phone won't stop ringing and another just runs all the
time. Also the ring leds seem to be on on all the phones.
Argh!

Does anyone have a manual for this thing?

Or can you explain the following terms?
Mode - PABX/Key system/Exclusive
Recall - Earth loop/Timed break
Ring bridge - short/long

TIA


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.