Re: Comfort UCM

["Paul Gordon" <paul_gordon@xxxxxxx>]

How timely! - I'm just installing my Comfort UCM upgrade as well...

I've just replaced the U1 chip with the new "Outside 1.144"
version, - that
appears to all be OK...

Just looking at the actual UCM board itself, I was wondering if the KA/KB
connectors that aren't there, (i.e. the blue pushfit screw blocks) are
actually active on the PCB? - I'm considering desoldering the 2-pin
connector bits from my old RS232 board, and soldering them onto the new UCM
- looks simple & straightforward enough, - even my soldering skills are
up
to that I reckon...

Then I caould just do a straight swap between the two boards, and continue
to use the pushfit blocks...

Anyone know if that will work?

Paul G.


>From: "Steve B" <steve@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: Re: [ukha_d] Comfort UCM
>Date: Sat, 23 Feb 2002 14:05:24 -0000
>
>I also had to solder to improve reliability.
>   ----- Original Message -----
>   From: Mike Griffiths
>   To: ukha_d@xxxxxxx
>   Sent: Saturday, February 23, 2002 12:50 PM
>   Subject: RE: [ukha_d] Comfort UCM
>
>
>   Think that is right Alan
>   Comfort expect you to use the Naff white connector for KB/KA and
volts
>and
>   Earth
>   I found this connector not at all satisfactory and soldered the
>connections
>   on :(
>   As I failed to find a supplier of the smart blue connectors and pins
>
>   Mike
>   At Home
>
>
>   -----Original Message-----
>   From: Alan Shields [mailto:alan@xxxxxxx]
>   Sent: Sat 23 Feb 2002 12:45
>   To: ukha_d@xxxxxxx
>   Subject: Re: [ukha_d] Comfort UCM
>
>   Just got my comfort UCM01/A this morning. On inspection the firmware
>   copy IC is missing and there are no KA/KB screw terminals, yet there
are
>   two sets of MIC/VOICE terminals.
>
>   Anybody know whether this is normal or have they sent me a duff
unit?
>
>   Thanks
>   Alan Shields
>   alan@xxxxxxx
>
>
>
>   For more information: http://www.automatedhome.co.uk
>   Post message: ukha_d@xxxxxxx
>   Subscribe:  ukha_d-subscribe@xxxxxxx
>   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>   List owner:  ukha_d-owner@xxxxxxx
>
>   Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   For more information: http://www.automatedhome.co.uk
>   Post message: ukha_d@xxxxxxx
>   Subscribe:  ukha_d-subscribe@xxxxxxx
>   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>   List owner:  ukha_d-owner@xxxxxxx
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>




_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com