The UK Home Automation Archive | ||
| Archive Home | ||
| Group Home | ||
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024 | ||||||||||||||||||||
|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Fw: Phantom X10 PIR Commands ?
Hmm. It has not detected motion now for 3 hrs and 10 mins (since we left for work) - but it is still detecting light on X+1 (last at 11:20 am) - not that it's really a problem, as it's set to B2 (and B3 for Dawn/Dusk) and I let homeseer pick that up - then action it (and using the MS13 scripts from the message board by mr doolittle) I was curious to know why it still sends +1 commands when only set to 24hr... G.
----- Forwarded by Gareth Cook/UK/IBM on 15/01/2002 12:03 -----
Gareth, I think you've misunderstood how these work - though I might have remembered this wrong myself! They always send on channel x and x+1 (X=1 being dusk/dawn). {Proviso - if you have taken the thing apart and disabled the sensor with either wire snips or by taping over it this doesn't apply}! The 24 hour thing I think stops the unit sending light on/off commands (i.e. on channel X) UNLESS it has sensed darkness (channel X+1). If you've set this, then you shouldn't be getting motion detection during daylight. -- Paul -- (Homeseer + 8 MS13e's)
For more information: http://www.automatedhome.co.uk Post message: ukha_d@xxxxxxx Subscribe: ukha_d-subscribe@xxxxxxx Unsubscribe: ukha_d-unsubscribe@xxxxxxx List owner: ukha_d-owner@xxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
For more information: http://www.automatedhome.co.uk Post message: ukha_d@xxxxxxx Subscribe: ukha_d-subscribe@xxxxxxx Unsubscribe: ukha_d-unsubscribe@xxxxxxx List owner: ukha_d-owner@xxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
