The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Fujitsu Tablets - How to mess with the OS


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Fujitsu Tablets - How to mess with the OS
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Wed, 23 Jan 2002 23:37:28 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Title: Message
72 pin SO-dimm even ;)
 
 
Des
-----Original Message-----
From: Des Gibbons [mailto:des@xxxxxxx]
Sent: Wednesday, January 23, 2002 23:32
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Fujitsu Tablets - How to mess with the OS

I would guess that they are using 144-pin EDO SO-dimms, were popular in notebooks of the era.
 
Des
-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: Wednesday, January 23, 2002 23:28
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Fujitsu Tablets - How to mess with the OS

From the Fujitsu website...
 
"8 MB EDO RAM on-board expandable using 72-pin DIMMs (EDO or fast-page)"
 
DIMMs are 168pin, SIMMs are 72pin. EDO RAM is only available in SIMMs, Fast Page RAM is only available in SIMMs. SIMMs are often referred to as DRAM which might be confusing I guess.
 
Check on http://www.dabs.com/products/prod-search.asp?action=search&tid=760&ob=manufacturer&obd=asc&stab=ref&paged=n and see if you agree ... there is no mention of EDO or Fast Page on any of the DIMM modules specs but the SIMMs are all classed as EDO or Fast Page.
 
It's more likely that they made a mistake and mistyped a "D" instead of an "S" isn't it rather than mistakenly typing 72 instead of 168 for the pin count and adding Fast Page and EDO where it wasn't, no?
 
Phil
 
 
-----Original Message-----
From: Mick Furlong [mailto:hiltoneltd@xxxxxxx]
Sent: 23 January 2002 22:57
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Fujitsu Tablets - How to mess with the OS

nope dimms
-----Original Message-----
From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
Sent: 23 January 2002 22:53
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Fujitsu Tablets - How to mess with the OS


> I was always under the impression that Dimms (the D being
> dual) eliminated the need for 2 x Simms (S being single)
>
> Or have I been a crap hardware engineer !
>
> (actually, dont answer that)

Absolutely right ... But IIRC the memory slots in the Fujitsu are SIMMs
aren't they?

Phil



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
[]



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.