Thanks for this guys, looks like the kinda thing I'm
after.
One thing I'm not sure on is the wired bit:
Is
it one wired sensor or one wired ZONE?
If
zone then gr8, as all downstairs PIRs (which I have put in the wires for)
can be one zone.
I'm still in two minds about alarming upstairs and/or adding
door/window contacts.
After all, why break in @ 1st floor level when it would be far less
obvious @ ground level.
Similarly, any competent theif is going to spot door contacts &
work around them, any 'chancer' will probably just smash their way in, so
the PIR would get them anyway....
The review of this product is quite positive. The main problem
I had b4 (apart from battery life) was the alarm going off for no reason -
perhaps because of car alarms or something down the road. Certainly
no-one else had the same system I did......
Oh
yeah, one final question:
I
had a loan of a ladder ages ago, so I wired in a siren attached to the
outside wall
I
have no idea of what wires I used -how can I tell without a) getting a
ladder again & physically inspecting it, or b) damaging either
the siren, or myself? :)
cheers,