The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: ADSL router/hub?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: ADSL router/hub?
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Mon, 1 Jul 2002 11:26:53 +1200
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Well, if it was me ;)

I would go with a combined modem/router such as the ASUS, connected to a
linksys WAP11 or maybe one of the new 802.11a AP's such as the linksys
WAP54A or SMC 2755W, not sure if they are available outside USA yet tho.

Cheers, Des.


-----Original Message-----
From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
Sent: 01 July 2002 10:52
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] ADSL router/hub?


Wires only Des, and you assumed right. There's no need to keep it separate,
but as wireless performance does vary from brand to brand, it seems sensible
to use Linksys kit, as I know that will provide the right level of coverage.
We did a fag packet calculation this afternoon, and reckon that to just to
put a network socket in every room would involve running 1000m of CAT5 in a
70 year old house - a massive undertaking - 802.11 isn't exactly
straightforward, but it is workable.

Tim

-----Original Message-----
From: Des Gibbons [mailto:des@xxxxxxx]
Sent: 30 June 2002 22:39
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] ADSL router/hub?

Tim,


I think from your post what you want to do is keep the wireless part
separate to allow for expansion in the future, if so...


Are you getting a wires only adsl install, or getting a modem supplied?

If wires only, then you either need a separate modem and router, or a
combined modem/router. For combined, the ASUS AAM6000EV does the job for not
much money
http://www.adslguide.org.uk/hardware/reviews/2001/q4/asus_aam6000ev.asp .

For separate, you will need an ADSL modem with an ethernet connection and an
ethernet router such as the linksys BEFSR41 or a USB ADSL modem and a USB
router such as the DrayTek Vigor 2200USB.

HTH

Des.

-----Original Message-----
From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
Sent: 01 July 2002 07:14
To: ukha_d@xxxxxxx Subject: [ukha_d] ADSL router/hub?


I'm beginning to think that everyone hates me, 'cos no-one is responding to
my Linksys questions. Maybe this one will get a better response J

There seem to be loads of ADSL routers that support PPPoE which seems to be
the standard in the States. I haven't seen that many that support PPPoA
which is used over here. Anyone got any recommendations.

My plan for the time being is to use 802.11b As and when we need an increase
in bandwidth I'll just swap out the access points for 802.11a (or whatever)
so it seems sensible to keep the modem/router/dhcp server separate at the
moment

Tim

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.