The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: OT: Traffic analysers


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RCS TX15-B Thermostat


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: RCS TX15-B Thermostat
  • From: "Peter Tuckett" <ptuckett@xxxxxxx>
  • Date: Mon, 1 Jul 2002 05:39:01 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Kevin - sorry I've only just got back to you, I've spent the weekend packing
as were moving next weekend! Thanks for going to the trouble of looking out
your unit the centre tip is negative on my pcb (HCURX Rev E). The dip
switches on this pcb only change the house code and the output functions of
the thermostat.
I am using a CM12U interface with homeseer. Can you suggest a better
interface which can cope with the extended X10? I must admit I did not
realise that the CM12U had this limitation but have suspected something was
amiss as I don't seem to get reliable feedback.

Pete

            -----Original Message-----
            From:       Kevin Hawkins [mailto:lists@xxxxxxx]
            Sent:      28 June 2002 17:52
            To:      ukha_d@xxxxxxx             Subject:      RE: [ukha_d] RCS TX15-B Thermostat

                  Sorry about this - another post - I have dug out the
unit so I will give it a try - however it is unclear on the power connector
whether it is centre tip positive or centre tip negative on the 12V
connector. Could you check on your psu please and let me know. The adaptor I
thought went with it ( I HATE wallwarts for this reason) is centre (+)
positive but the documentation says centre ground which normally means
negative.

                  I have asked the queston below because if it is a
CM12U then I think I remember somewhere that they have difficulty with
extended X10.

                  Kevin

                  -----Original Message-----
                  From:       Kevin Hawkins
[mailto:lists@xxxxxxx]
                  Sent:      28 June 2002 17:42
                  To:      ukha_d@xxxxxxx                   Subject:      RE: [ukha_d] RCS TX15-B Thermostat

                        Just one other question Peter - what is the
interface that Homeseer is using to receive and transmit X10 info ??

                        Kevin

                 

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

<<attachment: winmail.dat>>


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.