Re: Re: OT: Source of Circuit Boards

["Dave McLaughlin" <dave@xxxxxxx>]

You can get them to cut them out completely for you for about 8 euros.
Well
worth the extra dosh.

Dave..

----- Original Message -----
From: "i.bird@xxxxxxx" <Ian@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, July 03, 2002 1:47 PM
Subject: RE: Re: [ukha_d] OT: Source of Circuit Boards


> I would think PCB pool would be best for this quantity. You are way
small
but you could make them into one or two 20 by 20 board (or whatever)
which
you could snap into several of the smaller size. Get them to cut them
leaving only the smallest bit to break of course. It would probably
come
down to a couple of boards at around 30 to 50 Euros each. You can price
it
all off the web site.
>
> Alternatively try one way circuits at www.onewaycircuits.co.uk
> I phoned them and got a quote via mail after sending the Gerber
files.
>
> There are no doubt other comapnies as well. I have not used either yet
but
intend to use one way as I need quite a few boards.
>
> Your choice
>
> Ian B

> Original Message:
> -----------------
> From: Mark Marooth MMarooth@xxxxxxx
> Date: Wed, 3 Jul 2002 13:29:05 +0100
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] OT: Source of Circuit Boards
>
>
>
>
> Chaps,
>
> I'm about to embark on the construction of a number of Digital
Volume
Control
> modules 10 - 20.  I would normally etch my own circuit boards but
for this
> volume I was
> wondering if anyone could suggest a supplier who would take such a
small
order.
> Single sided boards measuring approx 5x5 cm.
>
> Cheers,
>
>
> Mark




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.