The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Fujitsu 510's


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: [OTish] Quiet PC PSU?



If you're going to the trouble of ripping off the plasterboard, you may as
well stuff in rockwool _and_ use sound dampening plasterboard on top.
It is v.difficult to sound 'proof' an existing room - unless you build a
room within a room at gr8 expense, so just maximise what you _can_ do.
Even with this solution, I do not get sound proof, but sound very very much
dampened.
While you're at it, rip out the ceiling and repeat the process to get
vertical sound dampening.  Means the midnite mode on your AV amp rarely gets
a lookin :-)


Tony

> -----Original Message-----
> From: john.benfield@xxxxxxx
> [mailto:john.benfield@xxxxxxx]
> Sent: 03 July 2002 14:54
> To: ukha_d@xxxxxxx > Subject: Re: [ukha_d] Re: [OTish] Quiet PC PSU?
>
>
> > Continuing my obsession with all things quiet (except the whole
> house
> > audio system!), can anyone recommend a good PC PSU (350W) that has
> a
> > quiet or silent (not that there's such a thing) fan.
> >
> > Unfortunately node 0 is right next door to my master bedroom - too
> > much noise gets through the stud partition wall (a real pain to
> > soundproof I think).
> >
> > Paul.
>
> Soundproofing a stud wall is not too difficult. If you remove
> the existing
> plaster board and put in some sound deadening material
> (Rockwool will do
> the job, although you can get specialist material) then
> replace the plaster
> board and replaster. If plaster is not you forte, use
> Fermicell (sp?). All
> you will need to do with this is fill the joints in. You can then
> paint/paper directly to it. Fermicell is a structural plaster
> board and can
> take heavy fixings, so not only do you get a quieter room,
> you can hand
> more on the walls.
> --------------------------------------------------------------
> -------------
> This message (including any attachments) is confidential and may be
> privileged. If you have received it by mistake please notify
> the sender by
> return e-mail and delete this message from your system. Any
> unauthorised
> use or dissemination of this message in whole or in part is strictly
> prohibited. Please note that e-mails are susceptible to change.
> ABN AMRO Bank N.V. (including its group companies) shall not
> be liable for
> the improper or incomplete transmission of the information
> contained in
> this communication nor for any delay in its receipt or damage to your
> system. ABN AMRO Bank N.V. (or its group companies) does not
> guarantee that
> the integrity of this communication has been maintained nor that this
> communication is free of viruses, interceptions or interference.
> --------------------------------------------------------------
> -------------
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


********************************************************************
      Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.