Re: 2.4ghz video sender IR problem

[Doogie Brodie <ukhad@xxxxxxx>]

John Risby wrote:

> that's basically what i have - if i understand you correctly. the
ir
> emitter is on the end of a cable with plugs into the transceiver -
i
> position that in front of the digibox.

I've got a couple of different sorts - the ones which came with my 
2.4GHz wireless sender are little square blocks with a self adhesive 
side and the wire hanging out the bottom. The other ones which came with
Tivo are plastic sticks with a bare IR LED on the end of it, the wire is
then out the end of the plastic stick.

Letsautomate sell seperate IR emitters... 
http://letsautomate.com/10063.cfm
the Xantech Blink ones look like they 
are the stick on the front of a device type, and the Smartlinc Blaster 
seems more like the Tivo one but without an actual stick... just the 
bare LED.

If you still have major problems, getting one of the Smartlinc Blasters
might help as it claims to flood an area of 4 feet, so could be a bit to
the side and give decent coverage I'd think.

-- 
Doogie

Yahoo! Groups Sponsor

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.