RE: X10 Switches

["Mark Hetherington" <mark.egroups@xxxxxxx>]

Darren Baker wrote:
> I am just installing my first AD10's to control my undertile heating
and
> heated towel rail in the bathroom. I also want a switch manual
override.
>
> Which switches do I need to get? Do I need standard on/off switches or
a
> momentary switch?
> I thought I just needed a standard switch but on LetsAutomate's
Clipsal
> page they mention that the momentary switch is "Suitable for use
with
> X10 AD10 or LD10 DIN modules" so I'm a bit confused.

You should use a momentary switch. Alternatively, you could use an RF
switch
in conjunction with a TM13 but for more reliable operation I would go
momentary over RF.

HTH.

Mark.