Re: A Question about X10.(correction)

["Frank Mc Alinden" <armagh@xxxxxxx>]

----- Original Message -----
From: "Frank Mc Alinden" <armagh@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, July 06, 2002 12:18 AM
Subject: Re: [ukha_d] A Question about X10.






    Sorry Ken
                   
Should be 10mf electro cap across the supply to the ir
reciever as close to it as possible NOT the signal (that will kill it
for
sure) .

Frank Mc


> Hi Ken
>     Also with ir recievers  while dabbling i
noticed i was getting some
> spikes while bench testing. Somewhere i came across a circuit
which
> suggested putting a 10mF electro across the the signal out and ground
of
the
> ir rx as close as possible to the sensor ,so ive done that with mine
so
far
> so good.Mine you my little shack is quite small all i need is 2
speakers
for
> surround sound......
>
> Frank Mc
> ----- Original Message -----
> From: "Kenneth Watt" <kennwatt@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Saturday, July 06, 2002 12:09 AM
> Subject: RE: [ukha_d] A Question about X10.
>
>
> > >
> > > Thanks for that Ken
> >
>                                
That was the main reason for buying hv
> > to
> > > have dimmer control . Have you heard of the A10 stuff
supposed to be
> > more
> > > reliable ,dimmer version available soon i hear from
digihouse here in
> > > melbourne .
> >
> > Yes, the new A10 dimmer solves any issues I have with X10 as it
stands
> > and if you can I would hold out for them as you will get status
response
> > from those AIUI.
> >
> > For me the issue then becomes the cost of replacing the LD11's
with the
> > A10 modules which will not be a cheap exercise but I will do it
where I
> > feel I need status. However, that said, using HV it is not
absolutely
> > essential to have a status response as I have found HV to be
extremely
> > good at tracking the status of the lights/appliances so far,
especially
> > if you spend the time figuring out how to program the schedule to
suit
> > your setup.
> >
> > K.
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.