The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: x10 & security if using (RF or IR)


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Veronica case





Hi Rowdy,

I put mine in a case with a 12V power supply but found that I was getting too
much interference so have gone back to using a wall wart.  I have mounted mine
in my Loftspace Node 0.5 beside MP3 jukebox and it is working a treat,  I have a
old house (circa 1740) with verrrry thick walls but I am getting reception in
all rooms problem at all.  I've got Gnd and Antenna wires running out of a
grommeted hole in the back of the case and have stuck the antenna wire to a
piece of perspex so that I can stand it up on the rear of the case.  Supply is
12V.

BTW, Case is an Aluminium job from *aplins.

Mark





--------+------------------------>
                  "Rowdy"      
                  <aoop43@xxxxxxx                   pex.com>     
                               
                  07/07/2002   
                  17:42        
                  Please respond
                  to ukha_d    
                               
--------+------------------------>
  >----------------------------------------------------------------------------
                                                                             
        To:     ukha_d@xxxxxxx                                       
        cc:     (bcc: Mark Marooth/SCOTIA)                                   
        Subject:     [ukha_d] Veronica case                                  
  >----------------------------------------------------------------------------




Hi all,

Just finished building  the 50mW stereo transmitter, curious to know where other
users of this have installed theirs. I don't know whether to put it is a
separate case or try and fit it inside my PC somehow, not sure if this would
kill the signal though.

Cheers,

Rowdy

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.